The Grainfather is electrically powered and designed to be used indoors. No need for burners, or hot plates, just plug in and go! It is fitted with a controlled heating element so that the correct power can be used depending on what stage of the brewing process you are at. A gentler heat is used at certain stages for accurate temperature control and to minimize the risk of scorching and after the mash it can also ramp up the heat quickly for when more vigorous heating is required. Heating from mash to boil takes as little as 20 minutes.

 

Control Box for Heat & Power Control:

Use the Connect Control Box in conjunction with the Connect App and Grainfather Brewing Community for the ultimate brewing experience. Create your recipes on the Grainfather Brewing Community and then sync these recipes with the Connect app. The control box has Bluetooth connection to your mobile device so it can be controlled remotely. This allows you to multitask or simply relax while brewing and then be alerted when to return to your next step. 

  • 304 Grade stainless steel body

  • 110 - 120V

  • 8 US Gal Capacity

  • Expandable grain basket to suit grain bills up to 20 lb

  • A robust magnetic drive pump (6 watt, 1800 RPM)

  • Counter flow wort chiller which can cool wort to less than 68°F within approx 20-30 minutes.

  • Tempered glass lid for maximum durability, heating efficiencies and visibility during your brew day.

  • Clips to easily convert your Grainfather into a home distillery with the Pot Still Attachments.

Local customers receive a hefty discount for purchasing in store and having it shipped directly to your door!

Grainfather Connect   

Only $999

The Robobrew is an all-in-one electric brewing system that has built in elements for heating and boiling, programmable mash schedule and delayed startt, a built in pump for recirculation, an onboard water resistant control panel for setting and monitoring temperatures, a removable grain basket, and a built in spigot for transferring.


One of the coolest features of the Robobrew is the ability to program the unit with up to 6 individual temperatures and durations so you can step mash precisely how you desire.

Built in magnetic drive pump to easily recirculate the wort during the mash. Dual heating elements run off of a single 110 volt plug and have individual switches allowing for more control over the heating process. One element is 1000 watts and the other is 500 for a combined 1500 watts! Use both when you need to ramp up the temperature quickly either at the start to get to your mash temp or to go from your mash temp to boiling. Use only one of the elements when you want to hold a temperature.

  • Stainless steel construction

  • 9 gallon total capacity with a finished beer output of 5-6 gallons

  • Digital temperature controller

  • Automatic step mashing with 6 programmable stages

  • 110V power and plug

  • Dual heating elements for total control (1000 watts and 500 watts)

  • Stainless steel 1/2 in ball valve for draining (don't have to use the pump)

  • Immersion wort chiller included

  • Stainless steel malt pipe/basket

  • Stamped volume markers

  • Glass lid

  • Magnetic drive pump for recirculation

  • Recirculation arm

  • Temperature reads in °F or °C (press and hold temp button for several seconds to adjust)

  • 32.75 in H (with recirculation arm) x 12.5 in D

  • Recommended max. grain bill - 18 lbs

  • Recommended min. grain bill - 8 lbs

    You might also want:

  • 2' of 1/2" ID Silicone tubing for sparging and draining.

  • To connect includedchiller: 20' of 1/2" ID tubing, 3 small hose clamps and 1 brass Garden Hose Thread by 1/2" barb adaptor. 

Local customers receive a hefty discount for purchasing in store and having it shipped directly to your door!

RoboBrew BrewZilla V3

Only $459

Now Carrying Florida Cascade Whole Hops!

FL_Hops_Logo.png

813.850.3503

​​

 

4022 Land O' Lakes Blvd. Land O' Lakes FL 34639

Tues, Wed, Thu : 11a - 5p

Fri, Sat : 11a - 6p

Sun, Mon : Closed

©2018 by Afford-a-Brew Homebrew Shop